Leader LV 5770SER42, Instruction Manual

Page: 13 / 67

2. AUDIO DISPLAY
10
2.3.5 Frame Location Indicator Display
When INPUT SELECT is set to SDI and F•1 DECODE MODE is set to DOLBY E, the frame
location value can be displayed with an indicator.
The indicator is shown in the lower left of the screen, and the value is indicated with a bar
and
▲
mark. These are normally shown in cyan, but when the value exceeds the
specified threshold, they turn red.
For information on the INPUT SELECT setting, see section 2.1.1, “Selecting the Signal to Measure.”
Figure 2-10 Frame location indicator display
To show the indicator, follow the procedure below to set INDICATE to ON.
Procedure
AUDIO → F•6 DOLBY SETUP → F•5 DOLBY E LINE POS
Figure 2-11 DOLBY E LINE POS tab