2. AUDIO DISPLAY
5
2.1.4
Selecting the Stream
When the input signal is 3G-B (2map), to select the stream to measure, follow the
procedure below.
Procedure
AUDIO
→
F•1 SOURCE SELECT
→
F•6 STREAM SELECT: STREAM 1 / STREAM 2
2.2
Selecting the Display Mode
To select the display mode, follow the procedure below.
It may take up to approximately 7 seconds to switch the display mode.
Procedure
AUDIO
→
F•2 DISPLAY MODE: LISSAJOU / METER / SURROUND / STATUS /
LOUDNESS
Settings
LISSAJOU:
The Lissajous curves are displayed. During 8-channel measurement, audio
meters are also displayed. During 16-channel external digital audio
measurement, channels B1 to B8 are displayed as CH9 to CH16.
METER:
The audio meters are displayed. This option cannot be selected during
8-channel measurement. During digital audio measurement, channels B1
to B8 are displayed as CH9 to CH16.
SURROUND:
The surround display is shown on the left side of the screen, and the audio
meter is displayed on the right side of the screen.
This option cannot be selected in simul mode or 16-channel measurement.
STATUS:
The status is displayed. During 8-channel measurement, audio meters are
also displayed. During 16-channel external digital audio measurement,
channels B1 to B8 are displayed as CH9 to CH16.
LOUDNESS:
The loudness values are displayed on a chart, on a meter, and as values.
This option cannot be selected in simul mode or 16-channel measurement.
DISPLAY MODE = LISSAJOU
DISPLAY MODE = METER
Summary of Contents for LV 5770SER42
