3. 12G OPTION MENU
22
3.2
Adjusting the Timing
Under 12G OPTION→SDI1→TIMING, you can adjust the SDI signal relative to the reference
signal.
You can also set SDI2 to SDI4 separately.
１．ＳＤＩ １
ＴＩＭＩＮＧ
↵
3.2.1
Adjusting the Timing (Line)
To adjust the SDI signal relative to the reference signal at the line level, follow the
procedure below.
３．ＳＤＩ １ ＴＩＭＩＮＧ Ｖ
０ ＬＩＮＥ
Procedure
12G OPTION → SDI1 → TIMING → VERTICAL
Parameter
±561 (default value: 0)
3.2.2
Adjusting the Timing (Dot)
To adjust the SDI signal relative to the reference signal at the dot level, follow the
procedure below. To the right of DOT, the value obtained by converting dots into time is
displayed.
３．ＳＤＩ １ ＴＩＭＩＮＧ Ｈ
０ ＤＯＴ ０．００００μｓ
Procedure
12G OPTION → SDI1 → TIMING → HORIZONTAL
Parameter
±2061 (default value: 0)
