Leader Like Me, Instruction Manual

Page: 27 / 61

25
Care Of Your Machine
To assemble the shuttle race
h: Hold the Shuttle by the center
pin and fit it carefully back into the
Shuttle Race , forming a
perfect circle with the shuttle driver.
i: Attach the Shuttle Race Cover
making sure that the bottom pin fits
into the notch.
j: Lock the Shuttle Race Cover
Holders by turning the holders
back into position until heared a
“click” sound.
k: Insert the Bobbin Case until
heared a “click” sound.
a: Remove the needle and the presser
foot.
Remove the Needle Plate Screws
and remove the Needle plate .
b: With a brush, clean out dust and lint
clogging on the feed dog teeth.
Replace the Needle Plate ,
tighten the Needle Plate Screw .
Cleaning the feed dogs
Turn off the power switch and unplug
the machine before cleaning.
Do not dismantle the machine other
than as explained in this section.
Cleaning shuttle race
Needle plate screw