Leader Like Me, Instruction Manual

Page: 10 / 61

8
Preparing To Sew
Bobbin winding
b: Place the spool of thread onto the
spool pin.
Pull the thread from the spool and
guide it around the Thread guide
and Bobbin winder Thread guide
c: Insert the thread through one of
the holes in the Bobbin from the
inside to the outside.
Wind the thread a few times by
hand around the empty bobbin in a
clockwise direction.
d: Place the Bobbin on the
Bobbin Winder Spindle and
push it the right to the bobbin
winding position.
e: Turn on the power switch. Press
the Foot Controller gently,
The bobbin will stop winding when
it is full.
Note
:
Do not forget to push back the
Bobbin winder spindle to the left,
then pull out the bobbin.
a: Spool Pin is used for holding
the spool of thread in order to feed
the thread to the machine. To use,
pull the spool pin out and place the
spool of thread over it, To store,
remove the spool of thread and push
back.