8
screws enough.
2.
Assemble the safe guard.
Fix the safe guard with hex key and wrench enclosed as
stardard accessories for tighting the nuts enough. Please see the below pictures showing.
Warning!
Use only original manufacturer's replacement parts, accessories and attachments. Failure to
do so can cause poor performance, possible injury and may void your warranty. Never use
the machine without the guard assembled!
3.Guide shaft assembly
Put the lower shaft (2) into the shaft coupling and concurrently pull out the locking pin (1). Slide the lower shaft
in as far as it will go and let go of the locking pin. The locking pin must engage into the opening (3) located
laterally in the lower shaft. Of necessary, slightly move the lower shaft to-and-fro until the locking pin safely
locks in place. Then tighten the fly nut (4).
