7
· if the appliance starts to vibrate abnormally (check immediately).
4)
Maintenance and storage
-
Keep all nuts, bolts, and screws tight to be sure the appliance is in safe working condition.
-
Check the grass catcher frequently for wear or deterioration.
-
Replace worn or damaged parts for safety.
-
For rotary mowers, ensure that only replacement cutting means of the right type are used.
-
Never store the equipment with petrol in the tank inside a building where fumes can reach
-
an open flame or spark;
-
Allow the engine to cool before storing in any enclosure;
-
To reduce the fire hazard, keep the engine, silencer, battery compartment and petrol
storage area free of grass, leaves, or excessive grease;
-
If the fuel tank has to be drained, this should be done outdoors.
SPECIAL SATETY WARNING
1.
Grip the handles of the brush cutter firmly with both hands. If you
suspend the work, Place the throttle into the idling position.
2.
Always be sure to maintain a steady, even posture while working
3.
Maintain the speed of the engine at the level required to perform
cutting work and never raise the speed of the engine above the
level necessary.
4.
If the grass gets caught in the blade during operation , or if you
need to check the unit of refuel the tank always be sure to turn
off the engine.
5. If the blade touches a hand object like a stone immediately stop
the engine and check it something is wrong with the blade. If
so,replace the blade by new one .
6. If someone calls out white working , always be sure to turn off the
engine before turning around.
7. Never touch the spark plug or plug cord while the engine is in
operation .Doing so may result in being subjected to an electrical
shock .
8. Never touch the muffler, spark plug or other metallic parts of the engine while the engine
is in operation or immediately after shutting down the engine. Doing so may result in
serious burns.
9. When you finish cutting in one location and wish to continue work in another
spot, turn off the engine and turn the until as the blade faces away from your body.
10. Check the cutting attachment stop turning under the engine idle before start to use the
machine.
ASSEMBLY
When assembling this machine, please follow the instructions for assembly steps.
1.
Assemble the handle on the machine.
First release the inner hex screws, second
take underside handle on the shaft, last assemble the unperside handle tighten the inner
