15
10.
If meet any problem, pull the pin of safety belt, then release the brush cutter soon.
11.
If the machine is hot, the throttle level can be adjusted to ON position directly when re
start the machine.
MAINTENANCE AND CARE
Before performing any maintenance or cleaning work, Always turn off the engine.
1. Do not spray the unit with water. Ingress of water may damage the engine and electrical
connection.
2. Clean the unit with a cloth, hand brush, etc.
Maintenance schedule
12 hours of use
24hours of use
36hours of use
Air
filter
clean clean replace
Spark plug
check
clean
replace
Expert inspection is required:
a) If the brush cutter strikes an object.
b) If the motor stops suddenly
c) If the blade is bent (do not align!)
d) If the gears are damaged.
Replacing and resharpening the cutting blade at the end of the mowing season always
resharpen the cutting blade or, if required, replace the cutting blade with a new one. Always
have the cutting blade resharpened or replaced by a customer service centre (measurement
of imbalance).
Unbalanced blades will cause the lawn mower to vibrate violently-risk of accident!
Change and clean the spark plug
1) Once the engine has cooled, remove the spark plug using the socket spanner supplied.
2) Clean the plug with a wire brush.
3) Using a feeler gauge; set the gap to 0.6-0.7 mm.
4) Install the spark plug carefully by hand, to avoid cross-threading.
