10
4.3
Release the Nylon cutting head.
Use screw driver to hold flange and then rotate the Nylon cutting head clockwise, it will be
replaced.
4.4
Fit the blade.
Keep hex key holding on the flange then release the nuts as picture showing, then put the
blade, holder B, cover and left nut according to priority as below picture.
Note the blade rotation direction needs be same as below picture. Use screw driver to hold
flange and tighten nut counter-clockwise, ensure the nut is tightened enough
4.5
Release blade
.
Use screw driver to hold flange and release nut, the blade can be took off.
Warning!
Please make sure the cutting head has been assembled correctly before use!
Note
: The packaging material is made of recycle materials. Dispose of packaging materials in
accordance with regulations.
5.
Fit the belt. According to picture showing, fit the belt well.
