16
5) After the spark plug is seated, tighten with spanner to compress the washer.
Clean the air filter
Unclip the air filter cover and remove the sponge filter element. To avoid objects falling into
the air tank, replace the air filter cover. Wash the filter element in warm soap water, rinse and
allow drying naturally.
Warning!
Never run the engine without the air filter element installed.
Storing the unit
After cutting, clean the unit thoroughly. Store the unit in a dry room allow the motor to cool
down beforehand.
TROUBLESHOOTING
Before performing any maintenance or cleaning work, always turn off the engine and
wait until the cutter has come to a standstill
1) Engine does not run:
---Reassemble the blade or Nylon cutter.
---check the fuel weather use out or not.
2) Engine power drops:
---Have cutting blade resharpened /replaced (customer service centre)
3) If the temperature of machines is too high:
---insure the machines have rest at regular time.
Faults which cannot be rectified with the aid of this table may be rectified by a specialist
company only (customer service centre).
