Le Maitre Ltd.
Wireless SQP User Manual
17
Figure 11 Final screen in COBRA mode, showing operating channel
5.3.4
Buttons
The buttons on the WSQP are dual purpose, and their operation depends on the display mode the system is
in. By default the WSQP starts up in COBRA display mode (M:COBRA), and so when in this mode the button
presses are passed directly to the COBRA transceiver.
If not in this display mode, button presses enter the menu for information and setup purposes.
1.
MENU/SYNC
o
When not in COBRA display mode (M:COBRA), the MENU button is used to enter the menu,
and each press will cycle the menu one item further. The WSQP has a simple, double
direction, numbered, circular menu. Once the end of the menu is reached, it will leave the
menu and return to the MENU/MODE screen. Holding down the MENU button at any point
within the menu will also leave and return back to MENU/MODE screen.
Figure 12 MENU/MODE – Enter the menu from this screen
o
When in COBRA display mode, this button acts as the SYNC button for the COBRA
transceiver. This button can be used to check the signal strength, and sync/un-sync the
machine to the 18R2 remote. See section 5.4 below for more info.
2.
DOWN/CH-
o
When not in COBRA display mode (M:COBRA), the DOWN button is only used to
change/modify corresponding menu settings down. It has no effect on the menu position
like the MENU and MODE buttons do.
o
When in COBRA display mode, it acts as the CH- button for the COBRA transceiver. Button
presses change the wireless operating channel down.
You can set the firing module to any channel between 00 and 99. Using the remote, you
can fire any firing modules set to the same channel on the remote.
3.
UP/CH+
o
Similarly, the UP button is only used to change/modify corresponding menu settings up. It
has no effect on the menu position like the MENU and MODE buttons do.
o
When in COBRA display mode it is used to change the wireless operating channel.
You can set the firing module to any channel between 00 and 99. Using the remote, you
can fire any firing modules set to the same channel on the remote.
4.
MODE/TEST
o
Provided you are not inside the menu, pressing and holding this button down for 2 seconds
will change display modes between COBRA display mode and the MENU/MODE screen.
o
When not in COBRA display mode (M:COBRA), the short presses (less than 2 seconds) of
MODE button , can be used to cycle the menu one item backwards. It can be used to
quickly access end of the menu from MENU/MODE screen.
