Le Maitre Ltd.
Wireless SQP User Manual
16
5.3.3
Start-up Sequence
On start-up the WSQP displays the following info in sequence:
First screen shows key switch position.
Figure 6 Start-up screen showing key in TEST position
Figure 7 Start-up screen showing key in ARM position
NOTE: If DMX is plugged in, the machine will default to DMX mode (M:DMX).
Without DMX plugged in, next screen will display indicate starting in COBRA mode (M:COBRA),
battery voltage (B:12.8V), and then display the regular COBRA start-up sequence.
o
COBRA firmware version (e.g.: Version 6.0.1):
Figure 8 Start-up screen showing COBRA version information
o
Module address: The WSQP automatically assigned module address. For example, “A18”.
When first syncing a machine to the remote, the address is automatically assigned. This
address is stored permanently on the machine until synced to a new remote whereby a
new address is assigned.
Figure 9 Start-up screen showing COBRA address
o
Voltage mode: Not applicable, but set to 9V mode (9.0).
o
Battery life: Not applicable, should display 1P9, and 2P9.
o
Self-Test: “Testing” is displayed whilst the module performs some checks.
Figure 10 Start-up screen showing COBRA self-test mode
o
Finally, operating channel (0-99):
