Note:
Remote Handset Operations
The Battle Fogger
Remote Handset was
designed to indicate operation modes . These are
as follows:
Slow flashing output:
Indicates unit is not
ready to operate but still in heating mode, fog is
not available at this point.
Quick flashing output:
Indicates unit is ready
to operate but still in heating mode, some fog is
available at this point.
Solid Led:
Indicates that the unit is ready to fog at full output.
No Illumination:
Problem. Check Remote Handset connection on the rear panel of Battle
Fogger. If this fails to correct the problem, contact your local Le Maitre dealer.
Remote Handset LED Indicator
Note:
In order to prime the fog machine, the handset indicator must be a solid red.
1.
The fog output time is set using the ‘Duration’ control. 0 to 5 minutes, and the time between
successive fog outputs is set using the ‘Interval’ control. 0 to 30 minutes. Continual flow can
be achieved if ‘Interval’ setting is 0.
7) Activating the
Smoke
switch will effect a pulsing fluid flow which will Prime the machine
correctly. Once Primed (when there is no more sporadic output) the controls on the remote
handset can be set as desired.
External Remote Connector
The standard Remote Handset cable may be extended from the machine, and oper-
ated effectively away from the Battle Fogger. The maximum recommended cable length is
75 Feet.
Remote and External Control Features
