- 32 -
SINGLE WEIGHING WITH TRAILER
In this case only
two weighing operations are performed
(tractor and trailer): the weights of the
empty tractor and trailer are used as preset tare; the value is entered on the spot or saved in the
lorry database.
Function not available if net functions are disabled (see parameter
in section
INFO MENU
).
SINGLE WEIGHING WITHOUT USING THE DATABASE
-
The tractor goes onto the weighbridge.
Press PTARE, enter the weight of the empty tractor (preset tare) via the numerical keypad,
confirm with ENTER.
The display shows the weight of the material loaded onto the tractor (net weight).
Hold the IN key pressed if the lorry is entering (the material will be unloaded),
appears
(Trailer = it indicates the t trailer function), press ENTER.
Hold the OUT key pressed if the lorry is leaving (the material has been loaded),
appears
(Trailer = it indicates the t trailer function), press ENTER.
The instrument saves the weighed value in the memory and shows
(printing takes place
after the subsequent weighing of the trailer).
The instrument automatically goes back to showing the gross weight.
-
The trailer goes onto the weighbridge.
Press PTARE, enter the weight value of the empty trailer (preset tare) via the numerical keypad,
confirm with ENTER.
The display shows the weight of the material loaded onto the trailer (net weight).
Press IN if the lorry is entering (the material will be unloaded).
Press OUT if the lorry is leaving (the material will be loaded).
The display shows the total weight (tractor + trailer) of the material preceded by the letter for
“Unloaded” if unloaded, letter
for “Loaded” if loaded.
The instrument saves the weighed value in the memory and sends it for printing.
The instrument automatically goes back to showing the gross weight.
To cancel the weighing press ESC.
