- 27 -
LORRY DATABASE
The lorry database allows you to associate a preset tare value (weight of the empty lorry) to a
database index. This value may be subsequently recalled rapidly and used to perform a single
weighing operation (see section
SINGLE WEIGHING USING THE DATABASE
)
.
DATABASE MODIFICATION
Hold down the DB key until you see
.
Enter the index to be associated to the lorry with the numerical keypad.
Press ENTER.
The display will show
(for Preset Tare).
Press ENTER.
With the numerical keypad enter the preset tare value to be associated to the lorry.
Confirm with ENTER.
PASSWORD ON THE DATABASE
A password can be set to protect the database from unauthorised changes, through a settable
password.
If the password is not active when accessing the menu (factory setting), the display shows
.
Set the desired password with the numerical keypad and confirm with ENTER.
Upon accessing the database in change mode again (see previous section), the display will show
and the user will enter the password.
If a wrong password is entered, the message
will appear and the access to the database will
be in read-only mode.
To change or disable the password after enabling it, access the
menu once again.
-
The display shows
; enter the password and confirm with ENTER.
-
The display shows
; it is now possible to change the password.
-
To disable the password enter 000000.
-
If the password is lost enter 14556 for the emergency unlock.
+
