13
EST
Time end
prompting
time
Time for which the buzzer sound is on when the
timer goes off.
Note: when
EST=9999
, the buzzer sound time is
indefinite
(0
～
9999s)
60
rT
Total time
error
correction
Correct the total timing error
6. System self-tuning
When the temperature control effect is not ideal, a system self-tuning can be carried out where the
equipment will automatically configurate its PID parameters. To do that, follow the next instructions:
during 6 seconds
→
enter the self-tuning state selection
1.
Press
-
The temperature section will display
AT
.
-
The speed display section will display
OFF
.
2.
Use
to select ON or OFF. Select
ON
to activate the self-tuning function.
to enter
→
self-tuning will begin.
3.
Press
-
The
AT
indicator will flash until self-tuning ends. Once it stops flashing, the new
parameters will be automatically saved.
To abort the process at any time, press
for 6 seconds or turn off the controller.
Note: during this process, the setting keys do not work.
10
actual time (s)
run time (s)
actual time (s)
-
correction
value
×
=
Summary of Contents for WB-S
Page 30: ...www labbox com ...
