G2F-POR101 Filter Cart Operation Procedure Manual
Part # NPOR101-2016
ISO 9001:2008 REGISTERED QMS
Page 15 of 16
Rev # 4.4
Jan. 2016
Copyright © 2016
Remove used G2F Element from housing by either pulling up on
the straps or by using the G2F–Puller and dispose of used element
in accordance with all applicable regulations.
Using clean shop towels wipe inside the housing removing any
visual contamination.
Insert new G2F element with the two fabric bands facing
upwards, force the element down until the bottom is firmly set
onto the inside edge of the G2F housing. (tapered cardboard end
down)
Never pour oil on top of new element.
Replace Lid assembly.
Hand-tighten T-handle clockwise.
