
13
CLEANING and MAINTENANCE (Part 2 of 4)
W
Weekly Cleaning
Use a mild detergent or stainless steel cleaner for the following cleaning steps:
Remove the front retaining knobs and remove the front panel.
Remove and clean the conveyor belt assembly. Locate chain cover at side of the control compartment (Illustration
1) and remove cover retention screw with a phillips screwdriver. Slide cover in direction of arrow shown in photo.
Lift frame at each corner (Illustration 2) and slide frame into oven approximately one inch. Chain should be loose
on sprocket (Illustration 3). Disengage chain from conveyor belt sprocket and remove from oven interior by sliding
it from control end of the cook chamber.
C A U T I O N
THE CONVEYOR BELT ASSEMBLY IS HEAVY. FOR
SAFE HANDLING, OBTAIN HELP AS NEEDED OR
EMPLOY APPROPRIATE MATERIAL-HANDLING
EQUIPMENT TO REMOVE THE ASSEMBLY FROM
THE APPLIANCE AND TO MOVE IT TO A SUITABLE
LOCATION FOR CLEANING.
Retaining
Knobs
Chain Cover
Illustration 2
Illustration 3
Illustration 1
Summary of Contents for LPC-19-G
Page 7: ...7 CLEARANCE REQUIREMENTS S Front View Top View ...
Page 16: ...16 ...