LAZBOY Premier Series, Owner'S Manual

Page: 55 / 60

55
For HELP, call La-Z-Boy
®
Hot Tubs at 1.800.465.2933.
ALL ACTIVE COMFORT MASSAGE JETS
Remove and clean the jets as needed using a high quality plumbing cleanser, water,
and a cloth or soft-bristled brush.
LED MOOD AND SAFETY LIGHTS
Drain the spa / hot tub and clean the LED Safety and Mood Light lens as needed using
an optical cloth and an eyewear cleaning product specifically designed not to scratch
optical surfaces.
If the back side of this lens is also dirty remove the rear panel, twist the light assembly
counterclockwise to remove the light from its holder, and clean in this same manner.
COMFORT REST PILLOWS
Remove and clean the Comfort Rest Pillows as needed using an all purpose cleaner
and rinse thoroughly with warm water.
SURFACE
The acrylic surface of your spa / hot tub should be cleaned with a high quality all
purpose cleaner and thoroughly rinsed with warm (not cold) water before refilling.
Cleaning your spa shell with abrasive cleaners could discolor, dull, or
dissolve the acrylic surface and will void your shell warranty.
NEVER use paint solvents, acids, acetone, benzene, lacquer thinner,
tolulene, xylene, or similar chemicals to clean your spa shell.
WATER
Depending on usage, the water in your spa / hot tub should be changed every 1-3
months. Upon each change of water it is a good practice to wipe down your spa.
WARNING