LAZBOY Premier Series, Owner'S Manual

Page: 54 / 60

54
For HELP, call La-Z-Boy
®
Hot Tubs at 1.800.465.2933.
DRAINING AND REFILLING YOUR SPA
FILTERS
The dual micro filters in your spa / hot tub should be removed and cleaned every week
with a high quality filter cleanser and typically replaced every 4-6 months (depending
upon use). You can clean your filters with the water pressure from the end of a garden
hose then rinsed with warm water. This ensures that the water is being filtered
properly.
DO NOT USE BLEACH . We recommend having replacement filters on hand that
can be swapped between cleanings. Doing so enables you to quickly exchange the
dirty filters with the clean ones and immediately start your spa / hot tub again. Call your
local dealer to order replacement filters and filter cleaner.
Figure 16 - Drain Operation
1. Turn Power Off - turn the power off at the spa consoles and deactivate disconnect
switches at the GFCI plug or load center.
2. Locate Spa Drain Valve - The spa drain valve is located on the side of the cabinet.
3. Remove Drain Valve Safety Cap - Pull the drain valve completely out. Remove
the safety drain cap and store for use when refilling your spa. Attach a standard
garden hose to the drain valve.
4. Attach Hose & Drain - With the garden hose attached push the drain valve in so
that the hose is flush with the drain. To stop draining the tub simply reverse the pro-
cess by pulling the drain completely out, installing the drain valve cap and pushing
the drain in fully. Make sure you do not force the drain in so that it is properly
aligned.