LAZBOY Premier Series, Owner'S Manual

Page: 28 / 60

28
For HELP, call La-Z-Boy
®
Hot Tubs at 1.800.465.2933.
SPA SUBMENUS
KEYPAD SETTINGS
In this section you can change the temperature
unit and language. Use the arrow keys and move
to the setting that you would like to change. Use
the Light key to choose and the arrow keys to
modify
For the temperature setting you have a choice be-
tween Fahrenheit or Celsius.
For the language setting you have a choice be-
tween English and French.
Wi-Fi (optional)
For the Wi-Fi menu to appear in the Settings
menu your I-Command module must be equipped
with software version 11.00 or higher. This menu
allows you to connect your I-Command module to
a Wi-Fi network or to change its network.
To connect your I-Command module to a wireless
network, use the UP and DOWN keys to go to the
Wi-Fi option in the Settings menu and Pump 2 to
select it.
After a few seconds the available networks will
appear on the screen, as well as their signal
strength.
Use the UP and DOWN keys to move through the
list. Select your network by pressing the Pump 2
key.
If the Wi-Fi network is password protected enter it
when prompted. If no password is required it will
connect automatically.
ELECTRICAL CONFIGURATION
Please do not make changes in this section
unless you are a qualified electrician.
FACTORY RESET
In this section you can see erros that have been
archived by the system. Use the UP and DOWN
keys to move through the list. Errors are archived
chronologically, from most recent to oldest (top to
bottom).
ABOUT
This section shows information about the keypad
software number and the revision numbers of the
different components of your system.
PURGE CYCLES
The purge cycles are programmed to begin at the
start of each filter cycle. Pump 2 activates for 1
minute, shuts off and then Pump 1 activates for 1
minute then shuts off.
SMART WINTER MODE
Smart Winter Mode protects your system from the
cold by turning the pumps on several times a day
to prevent water from freezing in the pipes. The
Smart Winter Mode indicator turns on when in this
mode of operation. If the temperature drops to 4
o
C
(39
o
F) within the heater chamber, the system au-
tomatically activates the pump to provide freeze
protection. The pump will operate until the temper-
ature reaches 5
o
C (41
o
F) before returning to nor-
mal system mode.
COOLING DOWN
After heating the spa water to the desired set
point, the heater is turned off, but the filtration
pump remains on for a certain amount of time to
ensure adequate cooling of the heating element in
order to prolong the useful life of the heater. The
heater icon flashes during this time.