LAZBOY Premier Series, Owner'S Manual

Page: 18 / 60

18
For HELP, call La-Z-Boy
®
Hot Tubs at 1.800.465.2933.
OPERATIONAL CHECKS
By now you have rechecked your spa / hot tub mechanical connections and filled it
with water through the pre-filter (if equipped). Turn on power to the spa / hot tub at the
main breaker panel and test the operation of the electrical system. If you encounter a
problem, please reference the troubleshooting guide.
1. Turn on the breaker and test the operation of the Ground-Fault Circuit Interrupter
(GFCI) breaker by pushing the small button. This should automatically trip the spa /
hot tub circuit breaker. Only if pushing this button successfully trips this circuit
breaker should you reset this breaker and proceed to the next step.
If this breaker does not trip, immediately call your electrician.
Do not use your spa / hot tub!
2. Go to the topside control panel and look at
the display. The system goes through a brief
startup sequence after which Pump 1 starts
in filtration mode and the panel displays the
current water temperature.
Figure 9 – Topside Control Panel
CAUTION
DANGER
INITIAL START UP PROCEDURE
Do not turn on any pump until your spa is properly filled with
water. Running any pump without water in your spa can cause
IMMEDIATE damage, which is not covered by the guarantee!