2.
KEYPAD SENSITIVITY LEVEL SET
UP
Set up
Keypad sensitivity- Your LR features a touch sensitive
keypad. You can adjust the sensitivity of this keypad by
following the steps below.
Note:
Do not set the sensitivity too high for the keypad or the
keys may respond too easily to mistaken touches.
2.1. Hold down "
" and "
VOLUME-
"
keys on the remote simultaneously for 2 seconds
until you hear two beep sounds. Upper four device
mode keys (TV, DVD, SAT, VCR) will light up.
2.2.
Press "
OK
" key. One device mode indicator will
flash indicating factory preset sensitivity level ie.
(CBL or level 5). Please refer to the following
chart.
Each device mode indicator light means different keypad
sensibility.
2.3.
Press " " key to increase sensitivity.
2.4.
Press " " key to decrease sensitivity.
2.5.
Press "
OK
" key to confirm. All device mode keys
will turn off except the selected device mode key
if successful.
Note:
If no key is pressed for more than 8 seconds, the
device mode indicators will flash six times and the
setup sensitivity mode will exit automatically.
12
Indicator
Sensibility
TV
Low
DVD
*
SAT
*
VCR
*
CBL
*
CD
*
AUD
*
AUX
High
1.2. HOW TO FIND THE REMOTE
- Press find key on the charging cradle. The red LED
indicator will flash 4 times.
- Your LR will emit a continous series of beep tones.
- Press any key on the LR once it is located to turn off
the beep tones. Note, the LR will emit a series of beep
tones for 60 seconds if no key is pressed and then turn
off.
11
