5.
HOW TO SET UP YOUR LA-Z-BOY
REMOTE (LR) (Teaching a dual signal)
If you found a learned programmed key only works
occasionally, your device remote may contain dual
signals. Try the following steps to learn this command:
5.1. Follow the steps from 4.1 to 4.4.
5.2. Press a desired key once on your LR which you
want to learn the command.
5.3. Press and keep holding the key on your original
equipment remote which you want to learn for a few
seconds.
5.4. When the upper 4 red device mode indicators flash
twice and then stay lit continuously, the command
has been learned successfully and you can release
the key on your original equipment remote.
5.5. Press the same key on step 5.2 once on the your LR
again.
5.6. Press and keep holding the same key on your device
remote on step 5.3 until the upper 4 red device mode
indicators flash twice and then stay lit continuously.
The dual signal command has been learned
successfully.
5.7. Repeat from step 5.2 to learn another keys dual
signal, or press the same device mode key on step
5.1 (e.g. TV) to terminate the learning mode, the
upper 4 red device mode indicators will flash twice
and then all device mode indicators turn off except
selected device mode key.
Note:
- On step 5.2 or 5.5 if no key is selected for more than 8
seconds, the upper 4 red device mode indicators will
flash
six times,
then all device mode indicators turn off
except the selected device mode key and the learning
mode will exit automatically.
- On step 5.3 or 5.6, if no IR signal is received for more
than 8 seconds, the upper 4 red device mode indicators
will flash
six times
and stay lit, and you need to select a
desired key again for learning as in step 5.2 or 5.5.
20
19
6.
HOW TO SET UP YOUR LA-Z-BOY
REMOTE (LR) (By PC SETUP)
-
P r e s s n e x t t o
continue.
6.2. Destination confirmation screen
-
P r e s s n e x t t o
continue.
6.3. Completion and launch screen
-
P r e s s f i n i s h t o
c o m p l e t e t h e
installation.
-
Connect your LR
to your PC via a
USB connection.
-
Click "launch LR
o n l i n e " t o
immediately start
up the software.
- Visit www.lazyboyremotes.com .
- Select "support", then "code download".
- Click the LR online image on the screen to download
the software interface.
6.1. A welcome screen will pop up
