9.
MACRO POWER
The Macro Power allows you to turn a second device on
or off at the same time. Follow the steps below to activate
this function.
9.1.
To activate the Macro Power setting:
9.1.1. Hold down "
" and "
VOLUME-
"
keys on the remote simultaneously for 2 seconds
until the upper 4 red device mode indicators light
up (TV, DVD, SAT, VCR) The lower clear
function keys will also be lit and you will hear 2
beep tones.
9.1.2. Enter the macro power code "1", "1", "2", "0". The
upper 4 red device mode indicators (TV, DVD,
SAT, VCR) will flash once and then stay lit
continuously. The lower clear function keys will
remain lit.
9.1.3. Press desired device mode key. (e.g. TV)
9.1.4. Press desired device mode key. (e.g. SAT)
9.1.5. The upper 4 red device mode indicators will flash
twice
and setting Macro power mode will exit if
the setting is activated.
9.1.6. Example: SAT Macro power is activated on TV
mode.
26
25
9.2.
To deactivate the Macro Power setting:
9.2.1. Hold down "
" and "
VOLUME-
"
keys on the remote simultaneously for 2 seconds
until the upper 4 red device mode indicators light
up (TV, DVD, SAT, VCR) The lower clear
function keys will also be lit and you will hear 2
beep tones.
9.2.2. Enter "1", "1", "2", "0" Macro power code. The
upper 4 red device mode indicators (TV, DVD,
SAT, VCR) will flash once and then stay lit
continuously. The clear lower function keys will
also be lit.
9.2.3. Press desired device mode key. (e.g. TV)
9.2.4. Press " " key.
9.2.5. Device mode indicators will flash
twice
and
setting Macro power mode will exit if the setting
is activated.
9.2.6. Example: Macro power is deactivated on TV
device mode.
