4
PBU-150-11
09/22
WIRING INSTRUCTIONS
1. Do not install any wiring or attempt to run this device without checking the wiring diagram
located on the inside of the control box cover.
2. Do not turn on power until you have finished making all power and control wiring connections.
3. Do not run power and control wiring in the same conduit.
4. Any wire connected to the control panel must be protected by conduit or other means to
ensure the safety and permanency of the wiring.
5. Use copper wire inside the control panel.
6. A separate fuse line of adequate capacity is needed for the device.
7. A remote power breaker shall be installed and provided by installer.
8. The device must be properly grounded. The ground screw, painted green, is located inside the
control panel.
WARNING
Disconnect power before proceeding with any wiring.
Failure to properly ground the device could result in electric shock and death or
serious injury.
