ruby User Manual
Version: 6.6.0/1
69/78
8. Troubleshooting
8.2
Boot-up Issues
8.2.1
The system will not boot
1.
Try restarting the system with a warm start.
2.
If this is unsuccessful perform a cold start.
3.
Are there feedback loops in the configuration which may stop the system from booting? For example:
·
The output of a logic function (e.g. OR8) is used as an input signal for the same function.
·
Control signals from a source (e.g. CD player) are used to feed control functions of the same device
creating a control loop.
The default mode can be used to exit the loop and load an empty configuration. Once boot-up is complete, you
can use SoP Explorer to reload all system firmware and the ON-AIR Designer to transfer a different
configuration.
