ruby User Manual
Version: 6.6.0/1
10/78
3. The Hardware
3.3.2
Central Module (954/50)
Central Module (full mode)
Central Module (monitor mode)
Central Module (full mode)
The upper section includes four sets of rotary encoders and small MF Keys which interact with the 12 Function
Buttons:
INP
,
DYN
,
LIM
, etc. Their functions are labeled by the OLED displays. When none of the Function
Buttons are active, the controls are defined by the configuration (MF Keys 29 to 42 and VCAs 3 to 6). When a
Function Button is pressed, then the controls provide DSP parameter control, bus assign, system options and
snapshots. To the left are two large MF Keys (45 & 46) with foil-printed labels.
In the lower section are more large MF Keys (1 to 28) with foil-printed labels, and two rotary encoders (VCAs1,
2) which are labeled by the displays.
All MF Keys and VCAs are defined by the configuration.
Central Modules (monitor mode)
Physically, these modules are identical to the full mode Central Module, but in the upper section the 12 Function
Buttons are NOT supported. This means that there is no access to DSP parameters, bus assign, system options
and snapshots.
All MF Keys and VCAs are defined by the configuration. Note that the 12 Function Buttons cannot be
reprogramed by the configuration and, therefore, will remain blank.
