ruby User Manual
Version: 6.6.0/1
61/78
7. Maintenance
7.1
Checking the Hardware Status
The Web UI can be used to check the hardware status of each control surface module.
To open the Web UI, connect a computer to DSP Core control system network, open a suitable browser
application and enter the IP address of DSP Core into the URL field.
If the DSP Core is Power Core, then you can check the status of the control surface components from the
Peripherals
->
Surface
menu:
Peripherals -> Surface
·
If a component is shown in green, then it is configured and operational.
·
If a component is shown in red, then it is configured but there is a problem - it is not fitted or connected,
or it may be faulty.
·
If a component is not listed, then it is not configured.
In the example above, the system has detected two Fader Modules and one Central Module. A further six Fader
Modules are configured, but either they are not fitted or their frame is not connected.
For more details about the Web UI, please refer to your the DSP Core manual.
