Lawo AG z4, User Manual

Page: 38 / 58

Operating concept
Working with operator management
38/ 58 4.0 z4 User Manual
Loading of presets
All operators can use the z4 setup generated by the
administrator and transferred via setup software, e. g. source
names, Tally/GPI settings, offset gain etc.
The audio parameters, however, are stored individually for every
operator and with reference to the source. This applies to all
DSP settings and the bus assignment per source.
To this end serve eight snapshots per operator that include the
sources supplying the channels with all their audio parameters.
Additionally, there exist 100 presets. Presets are the audio
parameters of a source that can be loaded in any channel, e. g.
for offering every operator the settings for a certain presenter.
The presets are also managed via the „user“ function.
1.
Press the setup button „USER“
The setup button “USER” shows green.
The following display appears:
Shows „PrstLoad“ (= load preset) in the top line of the
channel B display you can select a stored preset
„PRESTxxx.
2.
Turn the channel rotary control B to select a preset.
Die Presets werden über Nummern angezeigt.
USER
SRCE
1 2 3 R C L 4 4 L C R 3 2 1 4 L C R 3 2 1 1 2 3 R C L 4
PFL