Lawo AG z4, User Manual

Page: 25 / 58

Operating concept
Working with summing buses
z4 User Manual 4.0 25/ 58
4.
Push on the channel rotary control
The bus is now selected as output of the chosen z4 channel
strip. On the display appears an underscore under the selected
bus number.
You are still in the mode of bus selection and thus can
carry out direct settings for another channel by following
the steps 3 and 4.
5.
Press the setup button “BUS”
Terminates the summing bus assignment. The button “BUS”
goes out. The channel (PFL) buttons show dark yellow again.
MON
BUS