background image

7

SAFETY INFORMATION

Read these instructions carefully before operating this tool. 

Make sure that you are familiar with the controls and know 

how to properly operate the machine. By following these 

instructions, you can reduce the risk of fire, electric shock 

and personal injury.

READ CAREFULLY BEFORE USE. KEEP FOR FUTURE 

REFERENCE.

WARNING

WARNING

■  

Read the instructions carefully. Be familiar with the controls 

and the proper use of the machine.

■  Never allow people unfamiliar with these instructions or 

children to use the machine. Be sure that all operators 

know the information involved in this manual when using 

this machine.

■  The operator or user is responsible for accidents or hazards 

occurring to other people or their property.

■  Be sure to include this manual if this machine passes to a 

new owner or operator.

■  This product is not intended for use by persons (including 

children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concerning 

use of the product by a person responsible for their safety.

■  Children should be supervised to ensure that they do not 

play with the product.

■  Do not handle the machine with wet hands.

Summary of Contents for NPTBL31AB






































Reviews: