21
ASSEMBLY
blower nozzle is optional. Assemble it when high air speed is required.
Installing and Removing the Battery Pack
(See Figs. 9-10)
To install the battery pack:
■ Align the battery pack with the battery slot.
■ Insert the battery pack into the battery slot until the battery pack secures into place. Make sure
the battery is inserted in the correct direction (Fig. 9).
■ Do not use force when inserting the battery pack. It should slide into position and click.
To remove the battery pack:
■ Locate the battery release button, press and hold the button up (Fig. 10).
■ Slide the battery pack off the battery slot.
Adjusting Shoulder Straps on Harness
(See Figs. 11-12)
Straps should be adjusted to a comfortable position before starting the blower.
■ The blower should be in operating position before adjusting the shoulder straps. Put one arm
through the strap and onto shoulder, pulling the blower onto back. Put the other arm through the
other strap.
■ Grasp the lower adjustment strap and tighten (pull down on strap) until the backpack rests
comfortably against the lower back.
■ Grasp the upper adjustment straps and tighten (pull down on strap) until the backpack fits
comfortably on the shoulders (Fig. 11).
■ Once the blower feels comfortable, secure the chest strap (Fig. 12).
