background image

4

A STEELFORT PRODUCT  |  STEELFORT.CO.NZ

• 

Empty the fuel tank before storing or    

transporting the generator. Keep fire    

extinguisher handy at all times. 

BATTERY

• 

Lithium battery is maintenance free, if you have 

any question, please contact a local authorised 

dealer.

HOT SURFACE

• 

Running the generator will produce heat and 

severe burns may occur upon contact. DO NOT 

touch the engine while under operation or just 

after stopping the unit. 

• 

Avoid contact with hot exhaust gases and or 

hot surfaces. 

• 

Maintain at least 1m of clearance on all sides 

to ensure adequate cooling. Combustible 

material can catch fire upon contact. Maintain 

at least 3m of clearance from combustible 

materials.

MOVING PARTS

• 

Moving parts can cause severe injury. Keep 

hands and feet away from the unit. 

• 

DO NOT operate engine with covers, shrouds, 

or guards removed. 

• 

DO NOT wear loose-fitted clothing, dangling 

drawstrings or items that could become caught 

or entangled. 

• 

Tie up long hair and remove jewelry. The  

moving parts may catch operator’s hand, feet, 

hair and or loose clothing resulting in serious 

injury.

GENERAL WARNINGS

• 

Before use, check for loose or damaged parts, 

signs of oil or fuel leaks, and any other   

condition that may impact operation. 

• 

Repair or replace all damaged and or defective 

parts immediately. 

• 

Locate all operating controls and safety labels. 

• 

Make sure all the safety instructions are in 

correct working condition. 

• 

Operate only on level surfaces. 

• 

DO NOT expose the generator to excessive 

moisture, dust, and or dirt. 

• 

Keep all safety guards in place and in proper 

working order at all times. 

• 

DO NOT allow any material to block the cooling 

slots. 

• 

DO NOT allow children or untrained people to 

operate the unit. 

• 

DO NOT leave the generator unattended when 

it is in operation. Always turn off the generator 

prior to leaving the area.

ELECTRIC SHOCK

• 

The generator produces powerful voltage and 

the electricity and can be dangerous and cause 

serious life threatening injuries if an electric 

shock is received. 

• 

Please ensure that the unit is properly    

connected to an appropriate ground to help 

prevent electric shocks. 

• 

Failure to properly ground the unit can result 

in electrocution, especially if the generator 

is equipped with a wheel kit. Consult an  

electrician for local grounding requirements. 

• 

Installation should be performed by a certified 

electrician. Improper Installation could result in 

serious injury. 

• 

To reduce the risk of electric shocks. DO NOT 

use electrical cords that are worn, frayed, bare 

or otherwise damaged. 

• 

DO NOT touch bare wires or receptacles. 

• 

DO NOT operate the unit in wet weather. 

• 

Keep the generator dry and DO NOT handle 

generator or electrical cords while standing in 

water, while barefoot, or while hands or feet 

are wet. 

• 

Keep children or pets away.

• 

DO NOT plug the unit into a building electrical 

system without the proper use and installation 

of a transfer switch installed by a qualified 

electrician.

• 

When using the generator for backup power, 

notify your utility company. 

• 

Use approved transfers to isolate generator 

from electric utility. 

• 

Failure to isolate the unit from the power utility 

could result in serious injury to the staff and 

utility workers due to back-feed of electrical 

energy.

Summary of Contents for BQH3500





























Reviews: