background image

 

2. ESSENTIAL SAFETY MEASURES

GENERAL SAFETY INSTRUCTIONS 

CAUTIONS: 

A1 – 

Failure to observe the rules

and precautions associated with
pruner attachment

 

use could cause 

serious injuries.

 

THIS MANUAL MUST BE READ
TOGETHER WITH THE BRUSH
CUTTER MANUAL IT IS
DESIGNED TO BE FITTED ON (fig.
5). 

 

 

15 m 

 

PRUNER INSTRUCTIONS MANUAL 

 

 

 

 

 

Thank you for choosing one of our garden products
This product has been manufactured taking into
account the applicable safety regulations issued to
protect consumers. 

This manual describes and illustrates the 
various assembly, operation and maintenance 
operations required to keep the pruner 
attachment

 

in safe working condition. 

USEFUL PICTURES 

The pictures relating to the assembly operations 
and the machine description can be found on 
previous pages of this user manual. Keep these 
pages open while reading the assembly 
instructions. 

In the event of your equipment

 

needing 

servicing or repairs, please contact our dealer 
or an authorized after-sales service. 

DANGER:

The pruner attachment can only
be fitted on LK PBT3446 AUTO
MULTITOOLS brush cutter and
used with it. 

A2 – 

Anyone wanting to use the

pruner

 

must first of all read the

instruction and maintenance manual
carefully and become acquainted
with the controls for correct use of
the appliance.  

A2.1 - 

Keep this manual in a safe

place for future reference.

 

A3 – 

Never allow children (under 16)

and people not perfectly acquainted
with these instructions to use the
product.

 

A4 – 

Do not start the product

 

and use it 

close to persons, animals or things.

 

During operation, a minimum 
distance of 15 m between the 
machine and other people 
should be kept. 

A5 

- Special attention should be 

paid to possible dangers that 

may not be heard because of the 
noise made by the hedge trimmer.

 

A6 – 

Eliminate all hazards from the 

work area and make sure there are 
no hazards such as trees in 
dangerous positions, roads, railways, 
power cables.

 

A7 – 

The operator is responsible for 

any accidents or dangers involving 
other people or their belongings.

 

 

Summary of Contents for PBT3446TP
















Reviews: