chain can be raised with two fingers to the point
where an entire guide tooth is visible (Fig.26).
Fig.26
1 4
PRUNER INSTRUCTIONS MANUAL
TRANSPORT
During transport (including for
short distances) position the chain
protection (pict. 23).
ALWAYS USE GLOVES EVERY TIME
YOU NEED TO FIT OR REMOVE THE
CHAIN PROTECTION.
11)
Fully tighten the two nuts with the key pro-
vided (Fig.15) keeping the point of the bar
raised. Check that the chain can run freely in the
bar.
NOTE!!
The tension of a new chain must be
checked and set (with the engine off and the
brake on) after a few minutes of work.
STORAGE
#
Clean the pruner equipment.
#
Do not clean with harsh cleaners.
#
Keep the pruner equipment in a dry
and safe place, inaccessible to children.
BAR
- Periodically clean the chain race and oil pas-
sages.
- Lubricate the pinion with bearing grease.
- Overturn the bar (every time maintenance is
done) to ensure uniform wear.
-
Fit the chain protection guard (fig. 23).
Summary of Contents for PBT3446TP
