1 2
PRUNER INSTRUCTIONS MANUAL
WARNING! The cutting device will
continue to rotate for some time even
after moving the switch to the “OFF”
position. Firmly hold the two handles
until the cutting device comes to a
complete stop.
WARNING! Familiarize yourself with the
on/off switch in order to act promptly
in case of emergency.
8. OPERATION
HOW TO USE THE PRUNER ATTACHMENT
1)
Latch the belt hook (fig. 11 item 1) onto the
ring (fig. 11 item 2).
2)
Hold the hedge trimmer on the right side as
shown in fig.11.
(refer to Brushcutter manual).
DURING OPERATION
If a dangerous condition occurs,
immediately switch off the engine by
pressing the switch to the OFF
position.
The product is not electrically
isolated. Make sure there are no
electric cables or high voltage
cables in the working area. DANGER
OF ELECTRIC SHOCK
Always hold the hedge trimmer with both
hands.
Cut by pressing the accelerator lever as far
as it will go and enter into contact with the
wood when the motor is running at top
speed.
8.1 BRANCH PRUNING
- Before removing a branch, make sure:
1)
There is no one or no animals where the
branch will fall.
2)
Select the branch drop direction so as to be
able to move away in the opposite direction.
3)
Make sure the escape route is free of
obstacles.
4)
When choosing the drop direction, take the
following varying factors into account.
a)
–
Overgrown branches.
b)
–
Branch angle.
c)
–
Wind direction (do not use when the wind is
very strong)
d)
– Damaged wood
5)
Carefully observe the environmental
conditions described in the
“GENERAL
SAFETY PRECAUTIONS”
paragraph
.
6)
Cut from top to bottom as shown in fig.13-14.
Summary of Contents for PBT3446TP
