appliance but contact your service centre for re-
pair.
•
If the suplly cord is damaged, it must be replaced
by the manufacturer, its service agent or similary
qualified persons in order to avoid a hazard.
•
Should extension cables be used, ensure that these
lay on dry surfaces and protected against water jets.
•
Before vacuuming liquids, check the float functions
correctly. When vacuuming liquids, and when the
tank is full, a fl oat closes the suction opening, and the
vacuum operation is interrupted. Then switch off the
machine, disconnect the plug and empty the tank.
Regularly clean the water level limiting device (float)
and examine it for signs of damage.
•
If the equipment should overturn it is recommended
that the machine should be stood up before switching
off.
•
If foam or liquid escape from the appliance, switch off
immediately.
•
The equipment should not be used to pick up wa-
ter from containers lavatories, tubs, etc.
•
Aggressive solvents or detergents should not be
used.
•
Service and repairs must be carried out by qualified
personnel only. Only use manufacturer original spare
parts for service repair.
•
The manufacturer cannot be held responsible for any
damage/injury caused to persons, animals or property
caused by misuse of the appliance, not in compliance
with manual instructions.
USAGE
(see fig.
④⑤⑥⑦
)
• Be sure that switch is in off position (0) OFF and con-
nect the machine to a suitable socket.
• The machine must be always kept on horizontal ba-
ses, in a safe and stable way.
• Insert the suitable filters for the proper use.
•
Never use the appliance without filters .
• Use the most suitable accessories for the requested
usage.
• Put switch on (-) ON position in order to start the ma-
chine.
• (see fig.
⑦
) Pneumatic filter shaker C: If there should
be a reduction in the suction power, operate the
filter reset buton C several times to reset the filter .
• When job is over, switch off (0) OFF and keep away the
plug from the socket.
• If the appliance is used with especially fine dust
(size below 0.3 µm) the filter supplied will require
cleaning more frequently. For especially deman-
ding applications, the use of specific filters sup-
plied as an optional (Hepa) may be necessary.
sound pressure: LpA = 75 dB (A)
CARE AND MAINTENANCE
(see fig.
⑧
)
The unit is maintenance-free.
•
The machine shall be disconnected from its power
source, by removing the plug from the socket-
outlet, during cleaning or maintenance
• Clean the exterior part of the machine with a dry cloth.
• Move the appliance only by catching the carrying
handle located on the motor head.
• Store the appliance and the accessories in a dry
safe place, out of the reach of children.
WARRANTY CONDITIONS
All our machines are subjected to strict tests and are cov-
ered against manufacturing defects in accordance with
applicable regulations. The warranty is effective from
the date of purchase.
The following are not included in the warranty: -
Parts subject to normal wear. - Rubber parts, charcoal,
filters and the accessories and optional accessories. - Ac-
cidental damage, caused by transport, neglect or inade-
quate treatment, incorrect or improper use and installa-
tion failing - The warranty shall not cover any cleaning
operations to which the operative components may be
subjected, such as clogged nozzles and filter blocked
due to limestones. This pressure cleaner is intended to
be used for domestic and hobby work: the warranty
does not cover any other different kind of use.
DISPOSAL (WEEE)
c
As the owner of electrical or electronic equip-
ment, the law (in accordance with the EU Directive
2002/96/EC of 27 January 2003) prohibits you from
disposing of this product or its electrical / electro-
nic accessories as municipal solid waste and obli-
ges you to make use of the appropriate waste col-
lection facilities.
The product can be disposed of by returning it to
the distributor when a new product is purchased.
The new product must be equivalent to that being
disposed of.
9
