16
EN
VACUUMING DUST
• Fit the most suitable accessory in the handle
of the fl exible hose
L
.
- Connect the device to a suitable electrical
outlet.
- Start vacuuming by pressing main switch
B
.
- To select the suction power (from level 1 to
level 4), press the remote suction button
L
1
on the handgrip at short intervals; the se-
lected suction power level LED indicator will
light up. It is possible to change the power
level both when the suction is on and off . To
switch the vacuum on and off , hold down the
remote suction button
L
1
for about two sec-
onds.
STEAM CLEANING
• Fit the most suitable accessory in the handle
of the fl exible hose
L
.
• Connect the device to a suitable electrical
outlet.
• Start vacuuming by pressing main switch
B
• Turn on the steam system using switch
E
and
wait until “steam ready” light
D
lights up.
• For the outfl ow of the steam, press the lever
L
3
. The fi rst amount of steam will come out
with water condensation; direct the jet to
one side or onto a cloth.
Pre-select the amount of steam using
-
the knob
F
located on the appliance. The
gauge
R
indicates the pressure inside the
boiler.
To steam and vacuum simultaneously: it
-
is possible to use the above-mentioned
B
L
1
L
1
F
B
E
L
1
L
3
L
1
Summary of Contents for ETNA 4000
Page 3: ...ETNA 1 2 4 5 6 7 8 3...
