LAVOR Pro ETNA 4000, Instruction Manual

Page: 9 / 12

EN
17
EN
steamcleaning functions together.
To select the suction power (from level 1 to -
level 4), press the remote suction button
L
1
on the handgrip at short intervals; the
selected suction power level LED indicator
will light up. It is possible to change the
power level both when the suction is on
and off . To switch the vacuum on and off ,
hold down the remote suction button
L
1
for about two seconds.
When work is fi nished, release the steam -
lever
L
3
a few moments prior to switching
off the suction motor
L
1
. This will allow the
suction ducts to recover the humidity.
STEAM CL INJECTION HOT WATER
OR DETERGENT
• Fit the most suitable accessory in the handle
of the fl exible hose L .
• Connect the device to a suitable electrical
outlet.
Start vacuuming by pressing main switch -
B .
Turn on the steam system using switch - E
and wait until “steam ready” light
D
lights
up.
Start injection pump by pressing switch -
P
:
selection (I) hot water or detergent (II).
To help the primer of the injection pump, -
turn the steam tap
F
off and press the le-
ver
L
3
Pre-select the amount of steam using -
the knob F located on the appliance. The
gauge R indicates the pressure inside the
boiler.
To steam and vacuum simultaneously: it -
is possible to use the above-mentioned
steamcleaning functions together.
To select the suction power (from level 1 to -
level 4), press the remote suction button
L
1
on the handgrip at short intervals; the
selected suction power level LED indicator
will light up. It is possible to change the
power level both when the suction is on
and off . To switch the vacuum on and off ,
hold down the remote suction button
L
1
for about two seconds.
When work is fi nished, release the steam -
lever L
3
a few moments prior to switching
off the suction motor
L
1
. This will allow the
suction ducts to recover the humidity.
TOPPING UP THE BOILER WATER TANK WITH
WATER
• The boiler water tank L supplies the boiler
through an electronic level control; since this
is an external tank, it can be topped up any
time.
•
When water runs out in the boiler water
tank:
1. the appliance beeps intermittently
2. the no-water level pilot light C fl ashes
F
B E P
L
1
L
3
L
1