lavina V32E, User Manual

Page: 19 / 57

Superabrasive Owner’s manual original language – Lavina
®
V32E 01/2020
19
7.5 HEPA FILTER CHANGE
WARNING:
1. Turn off the vacuum and wait for the fan impeller to completely stop before opening the
machine to change filters.
IMPORTANT: All of the following procedures must be performed with the dust collector turned off
(look at the beginning of chapter 7). Before performing any work or maintenance on the vacuum, be
sure to wear the proper protective equipment. This might include clothing which covers any exposed
skin, protective eyewear, a respirator, and/or protective gloves conforming to protection class FFP3.
IMPORTANT: the used filer and debris must be disposed of using methods which fully comply with
local environmental laws and regulations.
To change the HEPA filter you need to follow the four steps as it’s shown in fig. 7.5.
1
st
Remove the two hoses form the HEPA chamber pos. 1.
2
nd
Release the 3 latches pos. 2.
3
rd
Lift the HEPA chamber head cover pos. 3. The HEPA filter is mounted on the head cover.
4
th
Unscrew the nut pos. 4 and remove the washer pos. 5. Pull the filter pos. 6 and replace it.
Make sure to replace also the nut pos. 4 with new one in order to avoid self-tapping!
After you place the new HEPA filter in the chamber do the steps in the reverse order.
Figure 7.5