lavina V32E, User Manual

Page: 18 / 57

Superabrasive Owner’s manual original language – Lavina
®
V32E 01/2020
18
7.4 MAIN FILTER CHANGE
WARNING:
1. Turn off the engine and wait for the fan impeller to completely stop before opening the
machine to change filters.
2.
Do not touch the exhaust! It will get very hot even when running the engine for a short
time.
IMPORTANT: All of the following procedures must be performed with the dust collector turned off
(look at the beginning of chapter 7). Before performing any work or maintenance on the vacuum, be
sure to wear the proper protective equipment. This might include clothing which covers any exposed
skin, protective eyewear, a respirator, and/or protective gloves conforming to protection class FFP3.
To replace the main filter, first remove the hoses pos.1 from the hepa chamber pos.2. Then release
the three latches pos.3 and open the head cover pos.4. Once opened, lift out the used filter pos.5
and place it carefully in a plastic bag. This bag must be properly disposed. Clean the area where the
filter lies and then insert the new filter. Only original filters may be used.
CAUTION: If you are removing the main filter in order to clean it: hitting the filter with force or using
compressed air may damage the filter. It can handle being cleaned with water, but not under high
pressure. Let the filter dry thoroughly before installing.
Figure 7.4