lavina V32E, User Manual

Page: 44 / 57

Superabrasive Owner’s manual original language – Lavina
®
V32E 01/2020
44
Note:
1. When mounting the inlet valve the bolts pos. 8 and 12 at fig. 11.1 must be tightened at 6
Nm.
2. Before mounting the inlet valve make sure both sealing rings are in position. The plastic
side of the sealing must be in contact with the inlet valve (fig. 11.4.1.1).
11.4.2 INLET VALVE AUTOMATIC FILTER CLEANING
LAVINA®V32E INLET VALVE AUTOMATIC FILTER CLEANING - V32GX-14.00.00
No.
Item No. Description Pcs. No. Item No. Description Pcs.
1 V32GX-14.00.07 Guard 1 9 30301280008 Spring Pin D6x22DIN1481 1
2 V32GX-14.10.00 Serving Handle Assembly 1 10 30301240103 Nut M6DIN985 9
3 30301290005
Hairpin Cotter
E03780
1 11 30301240106 Nut M8DIN985 1
4 30301210087 Bolt M6X30DIN6921 5 12 V32GX-14.00.02 Fork 2
5 30301210048 Bolt M6X12DIN6921 8 13 V32GX-14.00.04 Distance Bushing 5
6 V32GX-14.00.01
Base plate
2 14 V32GX-14.00.05 Distance Plate 1
7 30305000023 Actuator CAHB10A2A 1 15 30301210041 Bolt M6X40DIN933 4
8 V32GX-14.00.03 Valve 3in 1 16 30301210004 Bolt M8X40DIN933 1
Figure 11.4.2
Figure 11.4.1.1
Plastic side