lavina V32E, User Manual

Page: 13 / 57

Superabrasive Owner’s manual original language – Lavina
®
V32E 01/2020
13
6. UNPACKING, HANDLING, TRANSPORTATION AND
STORAGE
When unpacking the machine, please check that the following accessories are included:
-Steel wand;
-Floor brush;
-Main vacuum hose with camlock to connect to the machine;
-Accessory vacuum hose with cuff to connect to the wand;
If any of the above-mentioned parts are missing, please contact your local distributor or our sales
representative. Protect the environment: Please dispose of packaging materials and used machine
components in an environmentally safe way according to local disposal regulations.
Attention
• During transportation, battery and propane tank must be securely fastened and completely
disconnected at all times.
• Before operating the vacuum after transportation, propane tank and battery must be re-connected
and correctly assembled:
- Battery: Make sure that the wires are firmly connected to the correct terminals (black (-) & Red (+).
Also confirm that the bracket that holds the battery in place is correctly assembled, so that the
battery can’t move during operation.
- Propane tank: Make sure that the tank is firmly held in place by the lock and holder plate where the
propane tank sits on the back of the dust collector. It should not be able to move when itscorrectly
assembled.
When handling and transporting the machine, never use the handles or other machine parts to lift
the machine. Use always a skid or pallet for transportation, and never transport an unprotected
machine in the rain or snow. Always store and transport the machine in an upright position. The
machine should also always be stored in a dry, frost-proof environment.
Figure 6.1 Figure 6.2 Figure 6.3