LaView LV-N9916C6E Series User Manual Download Page 99

Page: 99 / 199

User Manual of LV-N9916C6E Series NVR

7.1.2

Backing up by Normal Video Search

Purpose:

The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB

writer) and DVD-R/W.

Backup using USB flash drives, USB HDDs, USB writer and DVD-R/W

Steps:

Enter Export interface.

Menu>Export>Normal

Set search condition and click

to enter the search result interface.

Notes:

Six different Record types are selectable: Continuous, Motion, Alarm, Motion | Alarm, Motion &

Alarm, Command Triggered and Manual. The command triggered record is configured by the platform

when the device accessed via the platform.

Two different File types are selectable: Unlocked and Locked.

Figure 7. 5

Normal Video Search for Backup

Select record files you want to back up.

Click button

to play the record file if you want to check it.

Check the checkbox before the record files you want to back up.

Note:

The size of the currently selected files is displayed in the lower-left corner of the window.

Summary of Contents for LV-N9916C6E Series








































































































































































































Search results

Summary of Contents for LV-N9916C6E Series

Reviews:

Related manuals for LV-N9916C6E Series

Brands by name

Popular brands

LaView LV-N9916C6E Series, User Manual

Search results

Summary of Contents for LV-N9916C6E Series

Reviews:

Related manuals for LV-N9916C6E Series

Brands by name

Popular brands