LaView LV-N9916C6E Series User Manual Download Page 90

Page: 90 / 199

User Manual of LV-N9916C6E Series NVR

Figure 6. 26

Interface of Playback by Time

Click the

on the playback control toolbar to enter Smart Search mode.

Click and drag the mouse to draw area(s). You can click button

to set the full screen as target searching

area. After drawing area(s), click button

to execute smart search in this area.

Note:

Multi-area and full-screen searching modes are supported.

Figure 6. 27

Draw Area of Smart Search

The results of smart search will be marked as

in the progress bar.

The hidden list of record files display when moving the mouse to the right of the playback interface.

Summary of Contents for LV-N9916C6E Series








































































































































































































Search results

Summary of Contents for LV-N9916C6E Series

Reviews:

Related manuals for LV-N9916C6E Series

Brands by name

Popular brands

LaView LV-N9916C6E Series, User Manual

Search results

Summary of Contents for LV-N9916C6E Series

Reviews:

Related manuals for LV-N9916C6E Series

Brands by name

Popular brands