LaView LV-N9916C6E Series User Manual Download Page 125

Page: 125 / 199

User Manual of LV-N9916C6E Series NVR

125

8.5

Handling Exceptions Alarm

Purpose:

Exception settings refer to the handling method of various exceptions, e.g.

•

HDD Full:

The HDD is full.

•

HDD Error:

Writing HDD error or unformatted HDD.

•

Network Disconnected:

Disconnected network cable.

•

IP Conflicted:

Duplicated IP address.

•

Illegal Login:

Incorrect user ID or password.

•

Abnormal Record/Capture:

No space for saving recorded files or captured images.

Steps:

Enter Exception interface of System Configuration and handle various exceptions.

Menu> Configuration> Exceptions

Please refer to

Chapter Setting Alarm Response Actions

for detailed alarm response actions.

Figure 8. 15

Exceptions Setup Interface

Summary of Contents for LV-N9916C6E Series








































































































































































































Search results

Summary of Contents for LV-N9916C6E Series

Reviews:

Related manuals for LV-N9916C6E Series

Brands by name

Popular brands

LaView LV-N9916C6E Series, User Manual

Search results

Summary of Contents for LV-N9916C6E Series

Reviews:

Related manuals for LV-N9916C6E Series

Brands by name

Popular brands