LaView LV-N9808C8E User Manual Download

Page: 167 / 195

User Manual of LV-N9808C8E Series NVR

167

12.3

Importing/Exporting Configuration Files

Purpose:

The configuration files of the NVR can be exported to local device for backup; and the configuration files of one

NVR can be imported to multiple NVR devices if they are to be configured with the same parameters.

Steps:

Enter the Import/Export Configuration File interface.

Menu > Maintenance >Import/Export

Figure 12. 12

Import/Export Config File

Click the

Export

button to export configuration files to the selected local backup device.

To import a configuration file, select the file from the selected backup device and click the

Import

button.

After the import process is completed, you must reboot the NVR.

Note:

After having finished the import of configuration files, the device will reboot automatically.

Summary of Contents for LV-N9808C8E




































































































































































































Search results

Summary of Contents for LV-N9808C8E

Reviews:

Related manuals for LV-N9808C8E

Brands by name

Popular brands

LaView LV-N9808C8E, User Manual

Search results

Summary of Contents for LV-N9808C8E

Reviews:

Related manuals for LV-N9808C8E

Brands by name

Popular brands