LaView LV-N9808C8E User Manual Download

Page: 36 / 195

User Manual of LV-N9808C8E Series NVR

3.1

Introduction of Live View

Live view shows you the video image getting from each camera in real time. The NVR automatically enters Live

View mode when powered on.

Live View Icons

In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the

record and alarm in the channel, so that you can know whether the channel is recorded, or whether there are alarms

occur as soon as possible.

Table 3. 1

Description of Live View Icons

Icons

Description

Alarm (video loss, tampering, motion detection or sensor alarm)

Record (manual record, schedule record, motion detection or alarm triggered record)

Alarm & Record

Summary of Contents for LV-N9808C8E




































































































































































































Search results

Summary of Contents for LV-N9808C8E

Reviews:

Related manuals for LV-N9808C8E

Brands by name

Popular brands

LaView LV-N9808C8E, User Manual

Search results

Summary of Contents for LV-N9808C8E

Reviews:

Related manuals for LV-N9808C8E

Brands by name

Popular brands