LaView LV-N9808C8E User Manual Download

Page: 172 / 195

User Manual of LV-N9808C8E Series NVR

172

13.1

Configuring General Settings

Purpose:

You can configure the output resolution, system time, mouse pointer speed through the Menu > Configuration >

General interface.

Steps:

Enter the General Settings interface.

Menu >Configuration> General

Select the

General

tab.

Figure 13. 1

General Settings Interface

Configure the following settings:

•

Language:

The default language used is

English

•

Resolution:

Select the output resolution, which must be the same with the resolution of the

monitor screen.

•

Time Zone:

Select the time zone.

•

Date Format:

Select the date format.

•

System Date:

Select the system date.

•

System Time:

Select the system time.

•

Mouse Pointer Speed:

Set the speed of mouse pointer; 4 levels are configurable.

•

Enable Wizard:

Enable/disable the Wizard when the device starts up.

•

Enable ID Authentication:

Enable/disable the use of the login password.

Click the

Apply

button to save the settings.

Summary of Contents for LV-N9808C8E




































































































































































































Search results

Summary of Contents for LV-N9808C8E

Reviews:

Related manuals for LV-N9808C8E

Brands by name

Popular brands

LaView LV-N9808C8E, User Manual

Search results

Summary of Contents for LV-N9808C8E

Reviews:

Related manuals for LV-N9808C8E

Brands by name

Popular brands